Real-time Security DVR Demos
Web DVR Demo
Click here to see the WEB DVR DEMO.
This option will allow you to see the security cameras at our office live, in real-time.
To run the software the first time, you will be prompted to download a cab file and you need to have ActiveX controls enabled in your web browser.
If you have any problems viewing the web dvr demo click here.)
The user id is guest and the password is guest.
If your browser doesn't automatically log you in, click the Log In button on the bottom right hand side of the DVR interface.
This is an example of how you could view your office remotely from any web browser anywhere in the world. You would set up your own id and password for your site.
Please be patient when accessing for the first time. It will take a moment.
If you have any problems viewing the demo, click here.
Security DVR Remote Client Demo
This will allow you to not only view what is happening live in real time, but also allow you to view past recordings, download recordings, or change most options on the OPTIVIEW DVR remotely.
Typically this option would have a different security level (different user id an password) than the web view. You may want to allow all your employees to view the cameras but not want everyone to be able to change the system configuration.
This option requires you to install some software on your machine, follow the steps below to set up the Security DVR remote client software.
Installation steps:
- Download and install the Remote Client software. Click here to download the full OPTIVIEW remote access client. Choose the most recent Remote Client file at the top of the page (click on "DOWNLOAD").
After the file is downloaded, click on it to complete the installation of the client software.
- Open the DVR Multi Client icon on desktop
- Create new user (Click on New) and type in a user name and password of your choice. Remember your password, you will need it later.
- In the "Add, Delete, and Edit Site Information" window, Click New to create a new site.
- Name the site "office", Type in the IP address "70.43.179.88", and enter "guest" for the username and "guest" for the password.
- Close the "Add, Delete, and Edit Site Information" window.
- Click on Setup Connection Mode.
- Select Single Site Connection and select the site name "office" in the drop down box. Check the Connect on Login and click OK.
- Close the Configuration Settings window.
- In the Login window, enter the password that you create in step 3 and click Login.
Note: To shut down the software, select the Push Button at the bottom right hand side of the screen.
|
